Place lights on the bottom side of the cabinet if you want the light to focus on your countertops, though glossy counters will reflect the lights. Put the lights on the backside of the bottom lip to have the lights point towards your walls.
LED strips come in various cutting lengths, with common sizes being 2 inches (5. 1 cm), 4 inches (10 cm), and 6 inches (15 cm).
Connectors come either L- or T-shaped to link 1 or 2 more strips respectively. You can also bend the tape in the corners if you don’t want to use connectors.
Alternatively, use a saw to make small slits in the lips that you can slide the strips into.
Any wood cleaner will work for this.
If your LED strip doesn’t stick to the cabinet, you can screw in guides or brackets to hold the strip in place. [4] X Research source
If the power source is large, drill a hole in the bottom of your cabinet. Place the power block inside at the back of your cabinet and feed the wires through the hole.
Get USB-powered LED strips and plug them into your phone’s car charger for another solution. If you want more control over the length of the LED strips, purchase ribbon-style lights where you can cut them shorter or longer to better fit your needs.
A solution of 1 part vinegar and 1 part warm water will work as a homemade cleaner. Common places for LED strips in cars are in the footwells and along the gear shift in the center console.
If you’re worried about the wires falling or don’t have a cloth liner, use clear or black electrical tape to hold the wires in place. If you cut the LED light strips, leave some extra conductors so that you can solder them. [9] X Expert Source Marvin WooLicensed Electrician Expert Interview. 31 January 2022.
